CHC-112R-3P

Rack Type Chain Hoist Controller (Direct Voltage Control)

This rack mount model is designed to accommodate for heavier rigging system. Its function is mostly the same as the briefcase type. The major difference is that rack mount type can be installed into standard 19” rack, like a portable dimmer rack system. It is available with 4-channel, 8-channel and the 12-channel. They are all linkable for larger scale of operation.

KUPO Grip CHC-14R-3P DC Chain Hoist Controller

CHC-112R-3P / DC CHAIN HOIST CONTROLLER

Output: Output: 3 x Soca 19-pin / Height: 6U

Features:

1. Each controller is supplied with a 2M cable with 5pin CEE form 32A male connector.

2. Handle grips for easy & convenience installation.

3. Each unit comes with footpad for desktop operation.

4. Linkable with 3pin XLR for master/slave function.

5. Output for 4-channel is 4pin CEE form 16A female socket; 8-channel and 12-channel comes with Soca 19pin female socket.

6. Universal 3-phase power input – AC/220V, 380V, 400V and 440V for maximum flexibility.

7. Multiple LED indicators provides the clear information of the working status.

8. Overload and circuit leakage breaker (applied for 8CH and 12CH) keeps user from working hazard.


FEATURES

Phase check for clear identification of respective incoming phases. Only when the phase sequence is correct does the equipment start to work. hase missing displays on a red LED indicator and the quipment won't be functioning. Lockable E-Stop button and phase reverse switch as standard feature.;

KUPO Grip CHC-14-3P 4-CH Controller

Overall system protection and control circuit breaker ensure the working stability.

 

 

KUPO Grip CHC-14-3P 4-CH Controller

Built up with 3-PIN XLR in/out connector as linkable ports for multiple system.

 

 

KUPO Grip CHC-14-3P 4-CH Controller

Individual up/down rotary switch per motor for handy operation.

 

KUPO Grip CHC-14-3P 4-CH Controller

Wiring information clearly disclosed on the front panel (for 8-CH controller) in favor of the user making the corresponding cable assembly for chain hoist controlling system.

KUPO Grip CHC-14-3P 4-CH Controller

Phase reverse switch helps to convert the phase into correct sequence.

 

KUPO Grip CHC-14-3P 4-CH Controller

Switching power supply for multiple input covering AC 220V, 380V, 400V and 440V for maximum flexibility.

 

KUPO Grip CHC-14-3P 4-CH Controller

Industry standard connectors: power input 32A 5P CEE receptacle; output 16A 4P CEE (4-CH) or 2 x 19-PIN connectors (8-CH).Four or eight channels of direct control using reversingcontactors built on the rear side of the panel.

KUPO Grip CHC-14-3P 4-CH Controller