229MB

229MB / High View Stand 229MB / High View Stand

229MB / High View Stand

● Aluminum stand with 5 risers and 6 sections.

● Dia. 50mm, 45mm, 40mm, 35mm, 30mm, 25mm

● Leg dia. 30mm

● with 3 leveling leg

The perfect tool for real estate, event, landscape and school photographers. Made from aluminium, the high view is light enough to be carried on location by one person but still strong enough to support up to 10kg. It is equipped with a 1/4" thread mounting plate comes with a 1/4’’ to 3/8’’ reducer on its top, so that you can mount a tripod ball head to it. A steel tether is also attached to the stand for an extra level of security while your camera is high in the air. Eyelets in the top plate can also be utilised to tether the top of the stand to the ground using guy wires (these are not included).

The 229 High View features 5 risers and 6 column sections allowing you to mount your camera, or lighting accessory, anywhere between 1.9 and 7.3 meters. For an extra level of stability, the centre column can be lowered independently of the legs and hardware. This allows for a fourth point of contact with the ground with minimal effort. Each leg also has its own adjustment built in to ensure stable set up on un-even ground.

Specification

 

Closed Length
 
174cm
68.5”

Maximum Height
 
730cm
287.4”

Minimum Operating Height
 
168cm
66.1”

Weight
 
10.8kg
23.8lbs

Footprint Diameter
 
110cm
43.3”

Maximum Load
 
10kg
22lbs

Stand Top
 
SW
 


Features

A steel tether is also attached to the stand for an extra level of security while your camera is high in the air. A 1/4"-20 mounting plate and a 1/4" to 3/8" reducer on its top, so that you can mount a camera or tripod ball head to it.
 
High View Stand Features
 
Eyelets in the top plate can also be utilised to tether the top of the stand to the ground using guy wires.
 
 
 

High View Stand Features

 

Bubble level is attached to the column to assist for easy leveling of the stand.
 
 
 

High View Stand Features

Equipped with rubber feet to increase stability on non-slip surfaces.
 
High View Stand Features
Three leveling legs for added ease of set-up on uneven surfaces.
 
High View Stand Features
 
 
 

High View Stand Features


 
 

Product Video

Kupo 229MB High View Stand is constructed by lightweight aluminum and features a camera plate with 1/4''-20 threaded on the stand top. With max height upto 7.3 M (24’), it's a perfect tool for real estate, event, landscape and school photographers. Support up to 10kg. (1 kg max. payload at 6 degree in clination while the stand is full extended to 7.3 m). 11.3 KG weight of the stand is able to be carried on location by one person.