756

756 / Jumbo Stand with Braked WheelFeatures
1. Large size T-handle on each riser is ergonomically design for biggest torque.
2. 28mm ( 1-1/8”)junior receiver with 3 eyelets for wind bracing kit.
3. Dual handle equipped on bottom spider casting for easily folding the base.
4. Brace on leg made of rectangular steel tubing for maximum stability and safety.
5. Auto self-locking device prevents unintentional and uncontrolled lowering of the load.
6. Industry 6” (152mm) braked caster included makes stand moveable in the studio or on location.
7. Assembled by bolts and nuts for easier maintenance and tightness adjustable instead of fixed rivet.

756 / Jumbo Stand with Braked Wheel

The Kupo Jumbo Stand made from chrome plated steel is designed to satisfy the industry’s requirement for extra safe operation with a heavy load, cranking stands. Kupo Jumbo stand can support a load capacity up to 70kg (154lb) and a maximum working height of 6.1m (20') when fully extended. Features direct drive gear mechanism and auto-locking device instead of pulley and cables for easier and safer operating this stand.

● 4 risers, 5 sections.

● Leg: 35 x 35mm

● Chrome plated steel stand with braked wheels

● Dia. 90mm, 80mm, 70mm, 60mm, 50mm

● Wind bracing kit (Supplied with the product)

Specification

 

Closed Length
 
2.3m
75.4'

Maximum Height
 
6.1m
20'

Minimum Operating Height
 
19.3m
6.33'

Weight
 
71kg
156lbs

Footprint Diameter
 
2.1m
7'

Maximum Load
 
70kg
154lbs

Stand Top
 
UV
 

Suggested Caster
 
KC-160
 

 
 
 

Features

28mm ( 1-1/8”) junior receiver with 3 side hole for wind bracing kit.
 
756 / Jumbo Stand with Braked Wheel
Large size T-handle on each riser is ergonomically design for biggest torque.
 
756 / Jumbo Stand with Braked Wheel
Auto self-locking device prevents unintentional and uncontrolled lowering of the load.
 

756 / Jumbo Stand with Braked Wheel

The detachable ratcheted crank handle prevents damage and reduces protrusions during transportation or storage.
 
756 / Jumbo Stand with Braked Wheel
 
Dual handle equipped on bottom spider casting for easily folding the base.
 
756 / Jumbo Stand with Braked Wheel

 

Industry 6” (152mm) braked caster included makes stand moveable in the studio or on location.
 
756 / Jumbo Stand with Braked Wheel
Brace on leg made of rectangular steel tubing (30x30mm) for maximum stability and safety.
 
 
756 / Jumbo Stand with Braked Wheel
 
Extension limit marking on each section.
 
 
 
756 / Jumbo Stand with Braked Wheel

 

RS-RR3807 / Rope Ratchet Tie Down
The rope is braided by polyester which is 3/8” (9.5mm) in diameter and 23’ (7M) in length. (Optional)
 
756 / Jumbo Stand with Braked Wheel
 
 
756 / Jumbo Stand with Braked Wheel
 
 
 
 
Dia.6mm x 10M nylon rope with stainless spring hook are included for attaching to the eyelets of stand to tether the top of stand to the ground (set for 3). (Included)
 

 

 
 
 
 

756 / Jumbo Stand with Braked Wheel